aymenz Posted September 28, 2011 Share Posted September 28, 2011 Hey Guys, I took aprat my canister yesterday to check for any problems inside and clean it if required, and to my surprise it started leaking not matter what I do, it keeps on leaking from the inlet/outlet valve if you turn them around the leaking will tend to stop from flowing out but then the connector will start dripping... How would I be able to fix this issue if it can be fixed? Your help and advice would be much appreciated as I couldn't find anything after googling for results Link to comment Share on other sites More sharing options...
Elapid Posted September 28, 2011 Share Posted September 28, 2011 Post a video, it's too hard to diagnose with such little information. Link to comment Share on other sites More sharing options...
CThompson Posted September 29, 2011 Share Posted September 29, 2011 You have given little information, not even a brand name... never the less, leaking from the inlet/outlet, I expect there will be some sort of O-ring seal here. Check to make sure there are no obstructions, or that you haven't scratched the O-ring surface, or you haven't lost the O-ring all together. If you post back give more (any) details as you'll be helping us help you. Post up some photos if you are able to do this. Link to comment Share on other sites More sharing options...
petshopdude Posted September 29, 2011 Share Posted September 29, 2011 atman filters should be the same as aqua one Aquis filters Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.