jakekersley Posted April 13, 2013 Share Posted April 13, 2013 HelloI have just set up my tank and I am having a few doubts about my set-up.Tank: 122x38x60Sump: 770x310x380mm Not drilled (250 bio cubes) (http://www.aquariums...au/filtersp.htm)Pump: resun SP-6000 (2800 l/ph)Overflows: 2 drilledThe photo attached is how the LFS advised me to set up my trickle/sump (the water level sits one third of the cubes not half as shown). Having this set up as advised, I found that the flow across the bio balls was poor and restricted.I removed the media and the flow increased quite alot, I than moved the drain from the filter sock onto the drip tray and now the flow across the cubes is great!Currently both drains are going onto the drip tray and the media ontop of the drip tray has been removed.In the third chamber (far right) i have ceramic rings + a filter sock that is currently un-used .Should I have a bigger pump so the drip tray is filled and I can use the other drain for the filter sock?Is this set up going to achieve the best filtration possible?Should I move the other drain to the filter sock and slightly slow the flow down across the cubes, or is more flow better?As you can tell I am quite confused about this, I would more than appreciate some help/information Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.