Pix Posted July 19, 2008 Share Posted July 19, 2008 Is it ok to top up my tank with a mix of hot and cold water with the hot direct from the hot tap, mixed into a bucket, with the cold and conditioner stuff added of course ? Link to comment Share on other sites More sharing options...
THEFATCATFISH Posted July 19, 2008 Share Posted July 19, 2008 Is it ok to top up my tank with a mix of hot and cold water with the hot direct from the hot tap, mixed into a bucket, with the cold and conditioner stuff added of course ? generally its discouraged as the hotwater can have more metals disolved in the water. Best to do smaller waterchanges that do not throw out the temperature so much. But I recently helps move a fishroom and we had to use hot tap water to avoid killing fish. Happy to say we didnt lose a single fish and there was lots of delicate stuff. So ya, best not too.... but its not the end of the world if you do. Last winter we had a blackout and I had to float 1/3 filled buckets full of hot water (gas hot water heater) in tanks to prevent them chilling too much. lol drama! Link to comment Share on other sites More sharing options...
Pix Posted July 19, 2008 Author Share Posted July 19, 2008 That would have been a bit of a juggling act, floating the buckets of hot water in the tanks. Glad it all worked out ok – the things we do Thanks for the reply, I have use the hot tap water, but that little voice I so often tell to hush, and regret it has been telling me its not a very good idea. Thought I would ask, the experts Link to comment Share on other sites More sharing options...
KIMO Posted July 19, 2008 Share Posted July 19, 2008 I'll add my 2 cent "expert" advice. When i do my water changes, i use the hot/cold mixer in the kitchen. You know the type that has one lever to mix the cold and hot water. I've been doing it this way since i started and have not had a problem. As long as you use water conditioners (i only use Prime) it should be ok. Link to comment Share on other sites More sharing options...
moldyform Posted July 22, 2008 Share Posted July 22, 2008 I also run hot/cold to the right temp and then pass it through a 2 stage carbon filtration unit and into my tank. Never had an issue and easy as. Do a 50% water change and full glass clean in under 10 mins easy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.