Davo Posted October 2, 2004 Share Posted October 2, 2004 Does anyone have a Dupla Delta CO2 system. I am having trouble getting mine to work properly. If someone does have the same system I need a bit of advice. Do you fill the bubble counter completely with water? Where did you put you check valve (seperate to the inbuilt one in the b/counter)? At the moment I have the c/valve between the b/counter and the reactor S. Do I put the valve between the bubble counter and the solenoid? The problem I am having is that when I turn the gas on and adjust the needle valve I cannot see any bubbles in the bubble counter. At the moment I am not connecting the PH Controller, just plugging the solenoid directly into the power point so I can adjust the amount of bubbles/minute. Also do you fill the Reactor S or leave it empty before turning the filter on? I think you are supposed to leave it empty. Are there any tips when setting up the system as the Dupla instructions are pretty sparse. Thanks, Dave, Mosman. Link to comment Share on other sites More sharing options...
Davo Posted October 6, 2004 Author Share Posted October 6, 2004 MODS, CAN YOU DELETE THIS POST AS I HAVE FIXED THE PROBLEM. THANKS, DAVE. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.