sorroz Posted September 25, 2014 Share Posted September 25, 2014 Hi all ...can anyone help out with where to buy the plastic moulding that sits on the top of the glass that the lids sit on .ThanksKevin Link to comment Share on other sites More sharing options...
LithoMan Posted September 25, 2014 Share Posted September 25, 2014 Hi MateYou mean for sliding lids ?bunnings had something similarbut give nam a call at west side aquariums i am sure he can help you out i get all my tanks and stuff from him .Cheers Link to comment Share on other sites More sharing options...
sorroz Posted September 26, 2014 Author Share Posted September 26, 2014 I am after the moulding that sits over the top edge of the glass and then has the angle at 90 degrees for the lids to sit onThanks I will give West side a call and have a look at BunningsKev Link to comment Share on other sites More sharing options...
LithoMan Posted September 26, 2014 Share Posted September 26, 2014 http://www.tubewayextrusions.com/plastic-misc-profiles.htmli know its UK lol but this is what you want Link to comment Share on other sites More sharing options...
Skippy Posted September 26, 2014 Share Posted September 26, 2014 Now that LithoMan has found out what they're called try a glazier Link to comment Share on other sites More sharing options...
fishdance Posted September 26, 2014 Share Posted September 26, 2014 Hi Kev,You have to buy minimum wholesale quanties and have an ABN if you want to buy direct from supplier. And they come in 2.4m lengths.I do have some I could onsell but I am in Brisbane. If your only after a small quantity and short - say 60cm lengths, I might be able to cut and ship.Winston Link to comment Share on other sites More sharing options...
sorroz Posted September 26, 2014 Author Share Posted September 26, 2014 Thanks all for the assist found some locally Thanks for the offer Winston ,would have worked out great if not available locally Kev Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.